ALFASHIELD ACF-100

Acrylic Based Crack Filler

Packaging
500Gm, 1Kg

Acrylic Based Crack Filler

ALFASHIELD ACF-100 is composed of high quality, weather durable acrylic emulsion polymer, graded fillers, light fast pigment & additives. It is a single pack, ready to use flexible component for filling cracks in plastered surfaces because of its excellent bonding, ease of application, water resistance, aesthetic appearance & durability.

Advantages:

Excellent bonding
Water resistant
Durable
Flexible
Easy to Apply
Ready to use

Field of Application / Uses:

To fill the static cracks of 3 to 5 mm sizes in horizontal or vertical areas of buildings & structures.
To level the undulation of the un-plastered or plastered ceilings and walls before painting.
To provide smooth finish to brick, stone, and wood work
As an excellent sculpting material.
Allow it to set for 24 hours and then apply another coat of ALFASHIELD ACF-100 Paste.
Further POP or putty application can be taken up once it is fully dry.
For best results allow ALFASHIELD ACF-100 Paste to cure for 7 days.

Application Instructions :

Surface Preparation

Surface must be free from dust, oil, grease, and loose particles etc.
Moisten the surface before applying ALFASHIELD ACF-100 Paste.
Fine hair line cracks must be widened up to 1 mm minimum using a scrapper and then filled.
For filling ALFASHIELD ACF-100 Paste on the internal surface, existing POP or putty must be removed till plaster surface is exposed.
For porous surfaces, apply primer coat prepared with ALFASHIELD ACF-100 Paste and water in 1:1 proportion over the crack. Fill ALFASHIELD ACF-100 Paste when the surface is tacky and not dried completely

Application:

Press ALFASHIELD ACF-100 Paste firmly into the crack with a spatula or putty knife and level with the surface.
Care must be taken to avoid formation of cavities or bubbles during application.
Keep out of reach of children