ALFA EIG is two-part, solvent-free, Low viscosity epoxy resin system is mixed in the proportions supplied to form a strong permanent bond and seal in cracks in concrete and masonry. This product is designed to be injected into cracks using suitable resin injection equipmen
Advantages:
- Low viscosity allows penetration into the finestcracks
- Formulated for hot climates
- Suitable for structural repairs
- Excellent bond to concrete, brick and masonry
- Minimum creep under sustained load
- Resistant to wide range of chemicals
- Non-shrink, adheres with no loss of bond
Recommended: ALFA EIG is designed to seal and bond cracks in concrete and masonry. Crack widths of between 0.1 mm and 9 mm can be treated.
Method of Application:
ALFA EIG can be applied using either injection packers fixed into holes drilled directly into the crack or drilled diagonally from concreteadjacent to the crack or by the fixing of injection nipples bonded to the surface using fast setting mortar.
Surface preparatio
Concrete surfaces to be treated must be clean and free of laitance, dirt, film, paint, coating or other foreign matter.
MIXING:
Thoroughly mix the entire hardener and base resin contents until the liquids become clear
