ALFASHIELD-2K

Two Component Cementitious Water Proof Coating

Packaging
30kg = 10kg (L)+20kg (P)
15 kg = 5 kg (L)+10kg (P)
03 kg = 1 kg (L)+2 kg (P)

ALFASHIELD-2K

Two Component Cementitious Water Proof Coating

ALFASHIELD 2K is a two component cementitious & acrylic polymer based flexible waterproofing & protective coating made up from the best quality Portland cement, properly selected & graded aggregates additives, fiber & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures.

Advantages:

Easy to apply by brush, roller & spray machine
Provides seamless and joint less waterproofing
Highly durable, UV tolerant & Flexibility
Excellent bond strength to porous and non porous concrete surfaces.
Non-toxic, suitable for drinking water & water tanks
Excellent resistance to ingress of water & thermal shocks

Field of Application / Uses

Basements, Raft, Retainings Wall Roof slabs,Such as parking decks, roof decks, Podium slabs, Green Areas, Planter boxes
Waterproofing under terrazzo or tile floors shower- pan, kitchen, laundry and Bathroom floors.

Application Instructions :

Surface Preparation

The surface must be strong & free from dirt, dust & loose particles. Thoroughly wire brush the surface &clean the dust by air compressor or wash the surface with water.
Oil & grease must be removed using degreasing solvents.

Any damaged surface must be repaired by using polymer modified repair mortar.

Mixing:

Shake well the liquid component to a homogenous milky color, before mixing transfer entire quantity ofliquid component into a suitable clean mixing vessel, gradually start addition of powder component under constant mixing with a stirrer using a pneumatic or electric power tool (1kw) at slow speed at 250 – 300 rpm for 3- 5 minutes to a homogeneous & uniform free flowing slurry.fter proper surface preparation apply 2 coats of ALFASHIEL- 2K mixed slurry in perpendicular direction. Do not dilute with water or any other material. Apply minimum 2 coats with a thickness of 0.75mm per coat. Leave it to dry for 24 hours. In case of swimming pool, water tanks, leave it for 7days before filling it with water as well as mock up or ponding tests on site.