It is a high performance, self leveling, chemical resistant elastomeric joint system. Due to its high polysulfide polymer content, it is resistant to many chemicals, shrinkage, aging, thermal stress and the effects of outdoor exposure. It is highly resilient and has excellent recovery characteristic after extended period of compression or elongation.
Standard Specification:
ALFA SEAL P-100 Complies with requirement of. B.S 5212. ASTM C 920-87 Type M class 25, Federal specs. TT-S-00227 E Type II Class A.
Advantages
- From a Tough , elastic , rubber-likr seal.
- Accommodates continuous and pronounced cyclic movement (± 25%)
- Adheres to most common substrates
- High resistance to ageing reduces physical damage due to climatic extremes
- Easy mixing and application
- Non-slumping – can be used in wide joints up to 40 mm wide.
- Safer nontoxic hardener
Application instruction:
- Joint surface to be applied should be clean dry and free from loose material, dust oil or grease.
- Apply appropriate quantity of primer.
- Empty out the curing agent sachet in to the base in the can.
- Mix and use immediately one complete unit at a time.
- Use a slow speed drill machine / mixer fitted with a spiral stirrer and mix for 10 minutes.
- The product is ready to be used when you get a uniform smooth paste without any streak of grey or white colour.
- Install a backer rod in the joint to be applied with sealant. Pour or gun (with a conventional cauling gun) the mixed sealant in the prepared joint.
- Sealant will get leveled in the joint. Please refer detail Sealant Application Guideline.
