ALFA EP-300

100% Solvent Free Epoxy Primer

Packaging
1.5Kg, 15Kg & 30Kg

ALFA EP-300

100% Solvent Free Epoxy Primer

It is a 100% reactive system and solvent free, two-component epoxy system consisting of an epoxy resin and amine type hardener. It is designed as a moisture insensitive adhesive and binder for numerous application needs and available in low viscosity and high modulus.

Uses

Sealing porous concrete
Coating and Priming
Binder in epoxy mortars
General Adhesive
Crack Injection
Anchoring
Joint repair material

Advantages

High compressive and tensile strength
Highly resistant to aggressive chemicals
Corrosion and abrasion resistant
Can withstand operating temperature from -30°C to 100°C(dry heat)
Universal adhesive for bonding together concrete, wood, ceramic and steel materials
Bond fresh concrete topping to hardened concrete slab waterproof.
Supplied pre-weighed quantities.
May be extended with sand or aggregate for thick applications and mortar repairs.

Instruction of use

Surface preparation:

Surface must be structurally sound, clean and free from dust, oil, grease, curing compounds, concrete laitance and other loose debris. Surface should be fairly rough. New concrete must be 28 days old and possess an open, porous and all surface treated curing agents and sealers should remove. Recommended methods for preparing concrete are by sandblasting, water jet, acid etching, grinding, wire brushing, or by pneumatic chipping tools. All free- standing water must be removed and substrate allowed to completely dry. In general, the surface preparation and application methods recommended in our method statement should be followed.

Mixing:

All materials should be in the temperature range between 16°C to 32°C. Pour the Part-B (Hardener) to Part-A, mix for 2 3 minutes using a drill fitted with jiffy mixer.